Selecting a desired track during playback
1Press PREV ’or NEXT ‘until the desired track appears on the display.
ª The selected track number and elapsed playing
time appear on the display.
•If you press PREV ’once it will skip to the beginning of the current track and play the track again.
Searching for a particular passage during playback
•Press and hold ˆor ‡until the desired passage is located.
ª The volume will be reduced.
•Play returns to normal when ˆor ‡is released.
Programming Tracks
Programming tracks of a loaded CD is possible in the stop mode. The display will indicate the total tracks stored in the program. Up to 20 tracks can be stored in the memory in any order. When 20 tracks are stored and you attempt to store another track, the display will show “PROGRAM FULL”.
1Load the desired disc in the disc tray.
2Press PROGRAM to start programming. ª The PROGRAM flag starts flashing.
3Press PREV ’or NEXT ‘to select the desired track.
4Press PROGRAM to store the track.
• Repeat steps 3 to 4 to store other tracks.
5Press STOP ‚once to end programming mode.
ªThe total number of tracks programmed and total playing time appear on the display.
Notes:
–If the total playing time is more than “99:59” or if one of the programmed tracks has a number greater than 30, then
–During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically.
Playing the program
1Press PLAY ƒto start program playback.
ª“PLAY PROGRAM” appears on the display.
ªThe track number and elapsed playing time of the
current track will appear on the display.
•If you press REPEAT during program playback, the current track will be played repeatedly.
ªThe REPEAT and PROGRAM flags will be displayed. 2 Press STOP ‚to stop program playback.
Reviewing the program
Reviewing of the program is only possible in the stop mode.
•Press PREV ’or NEXT ‘repeatedly to review the programmed tracks.
•Press STOP ‚to exit review mode.
Erasing the program (in the stop mode)
•Press CLEAR on the system.
ª “PROGRAM CLEARED” will be displayed.
CD
Note: | English | |
– The program will be erased when the system is | ||
| ||
disconnected from the power supply. If the CD tray is |
| |
opened, the program will be erased and the display |
| |
will show “ PROGRAM CLEARED” . |
|
Shuffle (only on remote control)
It will play all the tracks in random order. Shuffle may also be used when tracks are programmed.
To shuffle all the tracks
1Press SHUFFLE.
ª“SHUFFLE” will be displayed.
ªThe SHUFFLE flag, the track selected at random appears on the display.
•The tracks will now be played in random order until you press STOP ‚.
•If you press REPEAT during shuffling, the current track will be played repeatedly.
ª The REPEAT and SHUFFLE flags will be displayed.
2Press SHUFFLE again to resume normal playback. ª The SHUFFLE flag disappears from the display.
Repeat (only on remote control)
It will play the current track repeatedly.
1Press REPEAT during CD playback.
ª“REPEAT TRACK” will be displayed.
ªThe REPEAT flag appears on the display.
• The track will now be played repeatedly until you press STOP ‚.
2Press REPEAT again to resume normal playback. ª The REPEAT flag disappears from the display.
13
pg | 13 | 12/9/98, 15:54 | 3139 116 17531 |
