TIMER
English
OPTIMALJAZZ
DSCDBB
TECHNOROCK
DIGITAL SOUND CONTROL
CD
STANDBY.ON
DUBBING
▲ ▲
DUBBING
HIGH SPEED
DUBBING
NORMA•HIGH RECORD REPLAY
| STEREO | REC | DBB | I S |
| NEWS | HSD |
| |
| LW | AM PM | ||
| REPLAY FM | MW | ||
REPEAT SHUFFLE |
|
|
|
|
PROGRAMTIMER |
|
|
|
|
FW318C MINI HIFI SYSTEM | ||||
| TUNER |
|
| TAPE |
| BAND |
| TAPE 1 • TAPE 2 | |
TUNING ▲▲ | CLEAR |
|
|
|
SEARCH | STOP |
| PLAY | PAUSE |
MAX
▲
PREV
RDS
CLOCK
TIMER PROGRAM
VOLUME
AUX
VIDEO
PRESET ▲
n
MIC LEVEL
NEXT
•MAX
•At the preset time, the TIMER will be activated.
ªThe selected source will be played.
ªThe TIMER flag disappears from the display.
Notes:
–During timer setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.
–If the source selected is TUNER, the last tuned frequency will be switched on.
–If the source selected is CD, the first track of the disc will be played. If the CD tray is empty, the TUNER source will be selected instead.
To cancel the TIMER
1Press CLOCK•TIMER for more than 2 seconds.
2Press PAUSE •to cancel the timer.
ª“CANCEL” will be displayed.
ªThe TIMER flag disappears from the display.
Timer Setting
•The system can switch on to CD or TUNER mode automatically at a preset time. It can serve as an alarm to wake you up. After half an hour from the preset time, the system will return to the standby mode if no button is pressed.
•Before setting the timer, make sure the clock is set correctly.
•The timer has to be reset or start again for each subsequent preset time.
•The volume of the timer will be at the last setting before the set is switched to standby mode.
20
1Press and hold CLOCK•TIMER for more than 2 seconds to select timer mode.
ª“ON 00:00” or the last set timer starts flashing. The TIMER flag flashes.
ªThe last selected source is lighted while other available sources are flashing.
ª“ˆ, ‡, ’, ‘, ‚” light up (for models FW325 and FW326 only).
2Press CD or TUNER to select the desired source.
3Press ˆor ‡to set the hour for the timer to start.
4Press ’or ‘to set the minute for the timer to start.
5Press CLOCK•TIMER to store the start time.
ªThe TIMER is now set.
ªThe TIMER flag remains on the display.
• To exit without storing the setting, press STOP ‚.
To start the TIMER again (for the same time)
1Press CLOCK•TIMER for more than 2 seconds.
2Press CLOCK•TIMER again to store the start time and the selected source.
pg | 20 | 12/9/98, 15:54 | 3139 116 17531 |