Philips FWD182/98 owner manual Plug & Play, Playing a disc, Region Codes, MW loop, AC power cable

Make sure your DVD system and TV are connected and turned on!

Plug & Play

1Turn on the system.

“AUTO INSTALL - PRESS PLAY” will be displayed.

2Press PLAY 2; on the system to start installation.

Playing a disc

3Press DISC on the remote control.

4Turn on the TV and select the correct Video In mode.

You should see the blue Philips DVD background screen on the TV (If no disc in the DVD system).

5Press OPEN0CLOSE 0 on the front of the DVD system and load a disc, then press the corresponding OPEN0CLOSE 0 again to close the disc tray.

Make sure the disc label is facing up. For double-sided discs, load the side you want to play face down.

6Playback will start automatically.

If a disc menu appears, use 1/¡/5/4 buttons on the remote to make the necessary selection, then press OK to confirm. Or, use the numeric keypad on the remote to select features. Follow the instructions given in the disc menu.

7To stop playback, press STOP 9.

Region Codes

DVDs must be labeled for ALL regions or Region 3, in order to play on this DVD system.

3

ALL

You should find the below accessories in the packaging box.

Audio cables	Component video cables
	(red, blue, green)	MW loop
(white, red)
		antenna

Composite video cable	AC power cable
	FM wire antenna
(yellow)

Detailed playback features and additional functions are described in the

accompanying owner’s manual