Basic Operations
English
Switching on/off
Switching to active mode
●Press CD, TUNER, or AUX.
Switching to the Eco Power standby mode
●Press B.
➜ECO POWER button lights up.
➜The display screen will go blank.
Switching to standby mode (view clock)
●Press and hold B.
➜The clock is displayed.
➜While in the standby mode, pressing CLOCK¥TIMER button will switch the system to the Eco Power standby mode.
Note:
–Before switching the system to the Eco Power standby or standby mode, make sure the demonstration mode has been deactivated.
Demonstration mode
If the demonstration mode is active, whenever you switch the system to the Eco Power standby or standby mode, it will begin showing the various features offered by the system.
To activate the demonstration
●In Eco Power standby/standby mode,
press and hold Ç on the main unit until "DEMO ON" is displayed.
To deactivate the demonstration
●Press and hold Ç on the main unit until "DEMO OFF" is displayed.
Setting the clock
The clock can be set in either
5 (00:00 / 12:00AM)
2
4 (00:00 / 12:00AM)
3 (00:00 î 12:00AM)
1, 2, 6
1 Press and hold CLK/TIMER (or CLOCK•TIMER on the main unit) until ÒSELECT CLOCK OR TIMERÓ is displayed.
2Press ë to change the display to ÒCLOCKÓ and press CLK/TIMER (CLOCK•TIMER) again to confirm.
3 Press PROGRAM (PROG) repeatedly to change between
4 Press à or á repeatedly to set the hour. 5 Press í or ë repeatedly to set the minute.
6 Press CLK/TIMER (CLOCK•TIMER) to store the setting.
➜The clock will start working.
To view the clock time in any active mode
●Press CLK/TIMER (CLOCK•TIMER) once.
➜ The clock is displayed for a few seconds.
Notes:
–The clock setting will be erased when the system is disconnected from the power supply.
–The system will exit clock setting mode if no button is pressed within 90 seconds.
16
