Radio Reception
E n g l i s h
Notes:
–If you attempt to store more than 40 preset radio stations, "PROGRAM FULL" will be displayed.
–During programming, if no button is pressed within 20 seconds, the system will exit the Programme mode automatically.
Tuning to Preset Radio Stations
●Once youÕve preset the radio stations, press í or ë to select the desired preset number.
➜ The preset number, radio frequency, and waveband will appear on the display.
Erasing a Preset Radio Station
1Press í or ë to select the preset radio station to be erased.
2Press and hold Çon the system until ÒPRESET DELETEDÓ appears on the display.
➜The radio frequency remain on the display.
➜The preset numbers of all other preset radio stations in the band with higher numbers are also
decreased by one.
●Repeat steps
For Recording, please refer to “Tape Operation/Recording”.
Changing Tuning Grid
In some countries, the frequency step between adjacent channels in the MW band is 10 kHz (9 kHz in some areas). The preset frequency step in the factory is 9 kHz.
Changing the tuning grid will erase all previously stored preset radio stations.
1Disconnect the system from the AC power supply (pull out the AC power cord).
2While holding down TUNER and á on the system, reconnect the system to the AC power supply.
➜ The display will show "GRID 9" or "GRID 10".
Notes:
–GRID 9 and GRID 10 indicate that the tuning grid is in step of 9 kHz and 10 kHz respectively.
–The FM tuning grid also will be changed from 50 kHz to 100 kHz or vice versa.
24
