Philips Garbo manual Installation, Connecting to an external monitor

AV	Source	Menu	OK
Mute

Lamp

Stand

by

Temp

Computer

4. Installation Connecting to a computer <

Connecting to an external monitor

1Connect the VGA Y connector marked ‘Projector’ (5a), of an optional VGA Y-cable, to the Computer (in) socket of your projector.

2Connect the VGA cable supplied (1) between the computer and the VGA Y connector marked ‘Computer’ (5b).

3Connect the VGA Y connector marked ‘Monitor’ (5c) to the VGA cable (6) of the monitor.

4Switch on your Computer.

5Switch on the projector.

6Select ‘Computer’ input, using the Source button.

– ‘Computer’ appears on the screen.

Picture Display Audio Settings

Language

Keystone correction

Monitor out

System information...

Factory reset Key lock (more)

7Press Menu.

–The menu bar appears on the screen.

8 Use Cursor Control to select ‘Settings’ in the menu bar.

Picture Display Audio Settings

Language

Kestone correction

Monitor out

System information...

Factory reset Key lock (more)

Off On

Monitor out is to be activated if an extra monitor is connected to the projector. Otherwise it should be de-activated and no special Y-cable should be connected.

9Use Cursor Control to select ‘Monitor out’.

10Use Cursor Control to select ‘On’.

–The projector will indicate the necessity to connect the Y-cable.

11 Switch on the external monitor.

–The image projected is simultaneously shown on the monitor.

Philips Home Cinema Projector

English User guide Garbo 16