Philips Garbo Maintenance, Lamp Replacement, Push tab a to the right and remove the lamp door

Models: Garbo

1 33
Download 33 pages 16.13 Kb
Page 28
Image 28

 

 

6. Maintenance

>

Lamp

When operation time reaches the last 100 hours of the average lamplife, the message ‘Warning:

 

 

lamplife has almost expired’ will be displayed on the screen, each time the projector is switched

 

 

Warning:

 

on. The lamp indicator lights up orange.

 

Lamplife has almost expired

 

 

It is suggested to have a spare lamp available.

The lamp type is indicated in the user guide.

AV

Source

Menu

OK

Mute

 

 

 

Lamp

Stand

by

Temp

Picture Display Audio Settings

(previous) Start-up screen Lamp counter Auto standby Auto source Feedback

Lamp

5 Hours

Lamp counter shows the operating hours of the lamp. It is suggested to reset when a new lamp is inserted. To reset keep OK key pressed

for 3 seconds.

Warning:

Lamplife has expired

It is suggested to change the lamp, to avoid sudden failure and to improve overall picture quality.

Lamp Replacement

AV

Source

Menu

OK

Mute

 

 

 

Lamp

Stand

by

Temp

A

The lamplife remaining can be checked using the OSD menu.

1Press Menu.

The menu bar appears on the screen.

2Use Cursor Control to move the cursor to ‘Settings’.

3Use Cursor Control to select ‘Lamp counter’.

The remaining lamplife hours are displayed in the action window at the bottom of the screen.

When the lamplife has expired, the lamp indicator lights up red and the message ‘Warning: lamplife has expired’ is displayed on the screen.

1Switch off the projector and wait until the lamp has cooled down (about 5 minutes) before disconnecting the projector. Remove the mains lead from both projector and wall socket.

The mains lead must be disconnected from the projector otherwise the lamp door cannot be removed.

2Turn the projector over. Never place the projector on the side where the connections are located!

3Push tab A to the right and remove the lamp door.

When tab A is pressed the mains inlet socket will be partly closed. The lamp door therefore cannot be removed if the mains lead is not disconnected from the projector.

4Read the caution and warning labels on the lamp holder.

Philips Home Cinema Projector

English User guide Garbo

28

Page 28
Image 28
Philips Garbo manual Maintenance, Lamp Replacement, Push tab a to the right and remove the lamp door