Philips GC2030 manual To heat up the iron again, Cleaning and maintenance, Calc-Clean

8ENGLISH

			LYN
			NO
			N
			OLY
			N
S	S
I
L	O
K E
	I
WA						I N				N
	L				L				E
	I							N
	ON						I
	O	E				L
	L			N
			O		N
			COT								C
				O
			T
			COT

C

C

To heat up the iron again:

1Pick up the iron or move it slightly.

2The red auto-off pilot light will go out.The amber temperature pilot light will come on, depending on the soleplate temperature.

3If the amber pilot light comes on after the iron has been moved, wait for it to go out before you start ironing.

4If the amber light does not come on after the iron has been moved, the iron is ready for use.

Cleaning and maintenance

Calc-Clean

The Calc-Clean function removes scale and impurities.

Use the Calc-Clean function once every two weeks. If the water in your area is very hard (i.e. when flakes come out of the soleplate during ironing), the Calc-Clean function should be used more frequently.

1Set the steam control to position O.

2Fill the water tank to the maximum level.

Do not pour vinegar or other descaling agents into the water tank..

3Set the temperature dial to MAX.

4Put the plug in the wall socket.

5Unplug the iron when the amber pilot light has gone out.

6Hold the iron over the sink and set the steam control to position v (Calc-Clean).The steam control knob will spring up slightly.

7Pull the steam control up slightly and gently shake the iron.

BSteam and boiling water will come out of the soleplate. Impurities and scale (if any) will be flushed out.