10English
Tip: Clean the Microlux hearing capsule daily to prevent dirt or moisture from collecting between the hearing capsule and the customised sleeve.
1Firmly grip the pull tab of the hearing capsule (not the pull tab of the customised sleeve).
2Place the thumbnail of your other hand against the edge of the customised sleeve and pull the hearing capsule out of the sleeve.
3Clean the hearing capsule by rubbing it with a dry cloth or tissue.
Keep the hearing capsule dry.
4Check if the sound output and microphone opening are still clean and open. If they are not, ask your audiologist to clean them.
Never clean the capsule housing with cleaning agents yourself.
5Thoroughly clean and disinfect the customised sleeve by using the
cleaning agent provided by your audiologist.
Do not use any other cleaning agent than the one provided by your audiologist.
6Let the customised sleeve dry before you reinsert the hearing capsule.
Replacing the battery
Tip: If you have two Microlux hearing capsules, do not to take both of them apart at the same time to prevent switching the hearing capsules and sleeves.
Tip: Always work above a table or similar flat surface.
Note:The correct position is very important when placing the battery. The + of the battery should be on the same side as the pull tab.
Note: Always use the battery insertion aid provided to insert the battery. If, for any reason, you have to insert the battery with your fingers, place the battery horizontally between the battery contacts to prevent short- circuiting.