Philips HD8964 user manual English

76ENGLISH

RINSING

FILL HALF CARAFE WITH WATER. INSERT IN BREWING POSITION

RINSING

PLACE A CONTAINER

UNDER THE

DISPENSING SPOUT

RINSING

PAUSE

14Empty the milk carafe and fill half of it with fresh water. Insert it back into the machine with the dispensing spout open. Press the “” but- ton.

15Empty the container and place it back under both the milk carafe dis- penser and the dispensing spout. Press the “” button.

16The rinse cycle is activated.

Note:

To empty the container during the process and to pause the rinse cycle, press the “” button. To resume the cycle, press the “” button.

Note:

The rinse cycle is performed in order to have the circuit cleaned with a preset amount of water to ensure proper machine performance. If the water tank is not filled up to MAX level, the machine could require two or more cycles.

17When the amount of water needed for the rinse cycle has been completely dispensed, the machine automatically ends the descaling process.

Note:

Wait until it has finished rinsing.

18At the end of the descaling process, the machine performs an auto- matic rinse cycle. Wait until it finishes before removing and emptying the container.

19Disassemble and wash the milk carafe as described in the “Weekly Cleaning of the Milk Carafe” chapter.

20Empty the drip tray (internal) and place it back.

21Remove the small white filter and place back the “INTENZA+” water filter into the water tank if it was installed.

Note:

At the end of the descaling cycle, wash the brew group as described in the “Weekly Cleaning of the Brew Group” chapter.