Philips HES4900/12 user manual Safety-Important notes for users in the U.K

Models: HES4900/12

1 39
Download 39 pages 19.16 Kb
Page 4
Image 4
Safety-Important notes for users in the U.K.

‡ Do not mix batteries (old and new or carbon and alkaline, etc.).

‡ Remove batteries when the unit is not used for a long time.

oApparatus shall not be exposed to dripping or splashing.

pDo not place any sources of danger on

WKHDSSDUDWXV HJOLTXLGÀOOHGREMHFWV OLJKWHGFDQGOHV 

qThis product may contain lead and mercury. Disposal of these materials may be regulated due to environmental considerations. For disposal or recycling

information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org.

Never look into the laser beam inside the unit.

Warning

‡ Where the MAINS plug or an appliance coupler is used

as the disconnect device, the disconnect device shall

remain readily operable.

Wall mounting of the unit should only be SHUIRUPHGE\TXDOLÀHGSHUVRQQHO7KHXQLW must only be mounted on an appropriate wall bracket and on a wall that can safely hold the weight of the unit. Improper wall mounting can result in severe injury or damage. Do not attempt to wall mount the unit yourself.

Safety-Important notes for users in the U.K.

Mains plug

7KLVDSSDUDWXVLVÀWWHGZLWKDQDSSURYHG Amp plug.To change a fuse in this type of plug proceed as follows:

aRemove fuse cover and fuse.

bFix new fuse which should be a BS1362 5 Amp,A.S.T.A. or BSI approved type.

c 5HÀWWKHIXVHFRYHU

,IWKHÀWWHGSOXJLVQRWVXLWDEOHIRU\RXUVRFNHW

 

outlets, it should be cut off and an appropriate

English

If the mains plug contains a fuse, this should

SOXJÀWWHGLQLWVSODFH

 

have a value of 5 Amp. If a plug without a fuse

 

is used, the fuse at the distribution board should

 

not be greater than 5 Amp.

 

Note:The severed plug must be disposed off

 

to avoid a possible shock hazard should it be

 

inserted into a 13 Amp socket elsewhere.

 

How to connect a plug

 

The wires in the mains lead are coloured with

 

the following code: blue = neutral (N), brown

 

= live (L).

 

As these colours may not correspond with the

 

colour markings identifying the terminals in your

 

plug, proceed as follows:

 

‡ Connect the blue wire to the terminal

 

marked N or coloured black.

 

‡ Connect the brown wire to the terminal

 

marked L or coloured red.

 

‡ Do not connect either wire to the earth

 

terminal in the plug, marked E (or e) or

 

coloured green (or green and yellow).

 

Before replacing the plug cover, make certain

 

that the cord grip is clamped over the sheath of

 

the lead - not simply over the two wires.

 

Copyright in the U.K.

 

5HFRUGLQJDQGSOD\EDFNRIPDWHULDOPD\UHTXLUH

 

consent. see Copyright Act 1956 andThe

 

performer’s Protection Acts 1958 to 1972.

 

Norge

 

7\SHVNLOWÀQQHVSnDSSDUDWHQVEDNVLGH

 

Observer: Nettbryteren er sekundert innkoplet.

 

Den innebygde netdelen er derfor ikke

 

IUDNWRSOHWQHWWHWVnOHQJHDSSDUDWHWHUWLOVOXWWHW

 

nettkontakten.

 

)RUnUHGXVHUHIDUHQIRUEUDQQHOOHUHOHNWULVN

 

støt, skal apparatet, ikke utsettes for regn eller

 

fuktighet.

 

Notice

EN 5

Page 4
Image 4
Philips HES4900/12 user manual Safety-Important notes for users in the U.K