Philips HES4900/12 user manual Get started, Turn on, Find the correct viewing channel

4 Get started

Caution

‡Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in

VHTXHQFH

If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the back of the apparatus.Write the numbers here: Model No. __________________________

Serial No. ___________________________

Turn on

1Press .

»The unit switches to the last selected source.

2Wait for automatic setup of wireless connection between the main unit and subwoofer.

»[PAIRING]SDLULQJÁDVKHV

»If the connection succeeds, [PAIR OK] (pair OK) is displayed and the blue indicator on the subwoofer lights up.

»If the connection fails, [PAIR FAIL] (pair fail) is displayed and the green indicator on the subwoofer lights up.

»If the wireless connection fails, set up the connection manually.

Set up wireless connection manually

1In standby mode, press and hold SOURCE

on the main unit for 3 seconds. » [PAIRING]SDLULQJÁDVKHV

2Press and hold PAIR on the subwoofer for 3 seconds.

»The blue and green indicators on the

VXEZRRIHUÁDVKDOWHUQDWHO\

»If wireless connection succeeds, [PAIR OK] (pair OK) is displayed and the blue indicators on the subwoofer lights up.

3Turn on the main unit again.

Note

‡If the wireless connection fails again, check whether

WKHUHLVDQ\FRQÁLFWRUVWURQJLQWHUIHUHQFHIRUH[DPSOH interference from other electronic devices) around

\RXUORFDWLRQ$IWHUUHPRYDORIWKHFRQÁLFWRUVWURQJ interference, repeat the above procedures.

Find the correct viewing channel

1Press DISC to switch to disc mode.

18EN