2 ENGLISH | Ladyshave HP6307/00, HP6301/00 | 4222 002 28032 |
Introduction
With your new Philips Ladyshave you can quickly, easily and comfortably remove unwanted hair from dry or wet skin.
This Ladyshave can only be operated on batteries.
Important
Please read these instructions before using the appliance.
◗Store the appliance at a temperature between 15cC and 35cC.
◗Make sure that your hands and the appliance are dry when inserting the batteries.
◗Regular cleaning and proper maintenance ensure optimal results and guarantee the longest lifetime for your Ladyshave.
◗To keep the Ladyshave watertight:
-Make sure that the rubber sealing ring of the battery holder stays clean and undamaged.
-Apply some vaseline to the rubber sealing ring from time to time.
General description (fig. 1)
AProtection cap.
-Put the protection cap on the shaving head every time you have used the Ladyshave to prevent damage.
-You can also attach the protection cap to the bottom of the appliance to make it longer when you are shaving your legs and bikini line. This will allow you to better reach these areas.
BShaving head. Equipped with two trimmers (C and E) and a shaving foil (D).
CStraight trimmer. To remove longer hairs from arms, legs and bikini area.
DShaving foil. To remove shorter hairs.
E Curved trimmer. To shave the underarms. F On/off slide. I = on, O = off.
G Battery holder.
H Cover of battery holder. I Brush.
Preparing the appliance for use
The Ladyshave runs on two R6 AA 1.5 volt batteries.
We strongly advise you to use Philips LR6 PowerLife batteries. They supply sufficient energy for approx. 40 minutes of shaving.
Batteries contain substances that may pollute the environment.
Make sure your hands and the appliance are dry
when inserting the batteries.
1Remove the cover of the battery holder (H) by pulling it in the direction of the arrow (fig. 2).
2Put the batteries in the battery holder (fig. 3). Make sure the + and - poles of the batteries are pointing in the right direction.
3Push the cover of the battery holder back onto the appliance ('click').
◗To avoid damage due to battery leakage:
BDo not expose the Ladyshave to direct sunlight.
BDo not expose the appliance to temperatures higher than 35cC.
BRemove the batteries if the appliance is not going to be used for a month or more.
BDo not leave empty batteries in the appliance.
Using the appliance
The Ladyshave is suitable for:
-shaving the underarms;
-shaving the legs;
-shaving the bikini line.
On wet skin
You can use your Ladyshave on wet skin, e.g. while having a bath or shower.
The best results are obtained if you lather your skin (with soap or shaving cream) before you start shaving (fig. 4).
On dry skin
If you prefer to use the Ladyshave dry, make sure that your skin is clean and completely dry.
BThere is no difference between using the appliance on wet or and using it on dry skin.
BDo not apply
BAvoid pressing the shaving head too hard onto the skin as this will adversely affect shaving performance and may cause some skin irritation.
Legs and bikini line
1Switch the appliance on by moving the slide
(F) to position I (fig. 5).
Stretch the skin with your free hand to make the hairs stand upright.
2Place the straight trimmer (C) and the shaving foil (D) gently on the skin.
3Move the Ladyshave slowly over the skin against the direction of hair growth while pressing it lightly (fig. 6).
◗You can attach the protection cap to the bottom of your Ladyshave when you are shaving your legs and bikini line. The cap will make the Ladyshave longer, allowing you to better reach these areas (fig. 7).
4Switch the appliance off by moving the slide
(F) to position O (fig. 8).
Underarms
1Switch the appliance on by moving the slide
(F) to position I (fig. 5).
When shaving the underarm area, place on arm behind your head to stretch the skin.
2Place the rounded trimmer (E) and the shaving foil (D) gently on the skin.
