English
3Slide the cartridge with the pump into the
shaver. It only fits properly if the white side of the pump is pointing upwards.
4Close the cover (you will hear a click).
5Press the yellow pump button a few times until the NIVEA FOR MEN shaving gel/lotion appears.The shaver is now ready for use.
Replacing cartridges
2Do not throw the pump away when you replace
an empty cartridge.You will need it for the other
1 | cartridges. |
1Press the release button and open the cover of the cartridge compartment.
2Remove the empty cartridge and pull out the
pump.
3Push the pump into a new cartridge until it locks into position with a click.
4Slide the cartridge with the pump into the
shaver. It only fits properly if the white side of the pump is pointing upwards. Close the cover.
Storing cartridges
, You can conveniently store the other cartridges by attaching them to the wall holder supplied. The holder has suction caps which allow you to attach it to the wall easily. In this way you always have the cartridges close at hand, which is very convenient, especially when you shave in the shower.
