Philips HQC688 Corded clipping, Preparing for clipping, Clipping with comb attachment:

2Insert the mains plug into the wall socket.
BThe pilot light will go on to indicate that the
appliance is charging.
It will take approx.12 hours to fully charge the
battery.
Do not charge the appliance for more than 24
hours.
A fully charged appliance has a cordless clipping
time of up to 50 minutes.
Corded clipping
◗To clip with the hair clipper connected to the
mains:
Switch the hair clipper off,connect it to the mains
and wait a few seconds before switching it on.If
the battery is completely empty:wait a few
minutes before switching the appliance on.
Do not run the appliance from the mains when
the battery is fully charged.
Preparing for clipping
◗See also the booklet 'Modelling and styling'
and the instruction video.
Clipping with comb attachment:
Select the small or large comb attachment,
depending on the desired hair length (see table).
C1Slide the comb holder into the guiding
grooves of the appliance until you hear a
click.
ENGLISH 5