4 Get started
Caution
•Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the back of the apparatus.Write the numbers here: Model No. __________________________
Serial No. ___________________________
Prepare the remote control
Caution
•Risk of explosion! Keep batteries away from heat, sunshine or fi re. Never discard batteries in fi re.
•Risk of decreased battery life! Never mix different brands or types of batteries.
•Risk of product damage! When the remote control is not used for long periods, remove the batteries.
Note
•Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.
1Open the battery compartment.
2Insert two R03 or AAA batteries with correct polarity
3Close the battery compartment.
| 1 |
| English |
2 | 3 |
|
Find the correct viewing channel
1Press DISC to switch to disc mode.
2Press the source button repeatedly on the remote control of yourTV.
Tip
•The
Select the correctTV system
Change this setting if the video does not appear correctly. By default, this setting matches the most common setting forTVs in your country.
1Press OPTIONS.
2Select [Video Setup].
3 Select [TVType] and then press .
4Select a setting and then press OK.
•[PAL] - ForTV with PAL color system.
•[NTSC] - ForTV with NTSC color system.
•[Multi] - ForTV that is compatible with both PAL and NTSC.
5 To exit the menu, press OPTIONS.
EN 19