Philips HSB2351X/78 Get started, Turn on, Prepare the remote control, Select the correctTV system

4 Get started

Caution

•Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

Always follow the instructions in this chapter in sequence.

If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the back of the apparatus.Write the numbers here: Model No. __________________________

Serial No. ___________________________

1

2 3

Turn on

1Press .

»The unit switches to the last selected source.

English

Prepare the remote control

Caution

•Risk of explosion! Keep batteries away from heat, sunshine or re. Never discard batteries in re.

•Risk of decreased battery life! Never mix different brands or types of batteries.

•Risk of product damage! When the remote control is not used for long periods, remove the batteries.

Note

•Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

1Open the battery compartment.

2Insert two R03 or AAA batteries with correct polarity (+/-) as indicated.

3Close the battery compartment.

Find the correct viewing channel

1Press DISC to switch to disc mode.

2Press the source button repeatedly on the remote control of yourTV.

Tip

•The video-in channel may be called AV,VIDEO, HDMI etc. See theTV user manual on how to select the correct input on theTV.

Select the correctTV system

Change this setting if the video does not appear correctly. By default, this setting matches the most common setting forTVs in your country.

1Press OPTIONS.

2Select [Video Setup].

3Select [TVType] and then press .

4Select a setting and then press OK.

• [PAL] - ForTV with PAL color system.

EN 15

(1LQGG6HF