Option 2: Connect audio through analog audio cables
Basic quality audio
AUDIO IN- AUX |
VCR |
1 Using an analog cable, connect the AUX connectors on your home theater to the AUDIO OUT connectors on the TV or other device.
Set up speakers
Set up the speakers manually to experience customized surround sound.
Before you start
Make the necessary connections described in the quick start guide, and then switch the TV to the correct source for your home theater.
1 Press (Home).
2
3
4 Press the Navigation buttons and OK to select and change:
•[Speakers Volume]: Set the volume level of each speaker.
•[Speakers Delay]: Set the delay time for speakers which are placed closer to the seating position in order to obtain equal audio transmission from all the speakers.
Set up EasyLink (HDMI-CEC control)
This home theater supports Philips EasyLink, which uses the
Note
•• Depending on the manufacturer,
•• Philips does not guarantee 100% interoperability with all
Before you start
•Connect your home theater to the HDMI- CEC compliant device through HDMI connection.
•Make the necessary connections described in the quick start guide, and then switch the TV to the correct source for your home theater.
Enable EasyLink
1 Press (Home).
2 Select [Setup], and then press OK.
3 Select [Video], and then press OK.
4 Select [HDMI Setup] > [EasyLink Setup] > [EasyLink] > [On].
5 On your TV and other connected devices, turn on
•On your TV, set the audio output to
'Amplifier' (instead of TV speakers).
For details, see the TV user manual.
10EN