EasyLink controls
With EasyLink, you can control your home theater,TV, and other connected
•[One Touch Play]
•[One Touch Standby]
•[Sys Audio Control] (System audio control): If system audio control is enabled, the audio of the connected device is output through your home theater speakers automatically when you play the device.
•[Audio Mapping] (Audio input mapping):If system audio control does not work, map the connected device to the correct audio input connector on your home theater.
(see 'Set up the audio' on page 11)
Note
•• To change the EasyLink control settings, press (Home), select [Setup] > [Video] > [HDMI Setup] > [EasyLink Setup] > [EasyLink].
Set up the audio
If you cannot hear the audio output of a connected device through your home theater speakers, do the following:
•Check that you have enabled EasyLink on all the devices, (see 'Set up EasyLink
•on your TV, set the audio output to
"Amplifier" (instead of TV speakers). For details, see the TV user manual, and
•setup the EasyLink audio control.
1
2
3
4
5
6
Press (Home).
Select [Setup], and then press OK. Select [Video], and then press OK.
Select [HDMI Setup] > [EasyLink Setup]
>[Sys Audio Control] > [On].
• To play the audio from the TV speakers, select [Off], and skip the following steps.
Select [HDMI Setup] > [EasyLink Setup]
>[Audio Mapping].
Follow the onscreen instructions to map the connected device to the audio inputs on your home theater.
•If you connect your home theater to the TV through an HDMI ARC connection, make sure that the TV audio is mapped to the ARC input on your home theater.
EN 11