4 Press 
to stop slideshow.
5 Press 
again to stop music.
Radio
Listen to FM radio on your home theater, and store up to 40 radio stations.
Note
•• AM and digital radio are not supported.
•• If no stereo signal is detected, you are prompted to install the radio stations again.
1 Connect the FM antenna to the FM ANTENNA on your home theater.
• For the best reception, place the antenna away from your TV or other sources of radiation.
2 Press RADIO to switch to radio source.
»»If you have already installed the radio stations, the last channel that you listened to is played.
»»If you have not installed any radio stations, the message AUTO INSTALL...PRESS PLAY appears on the display panel. Press 
(Play).
3 Use the remote control to listen or to change radio stations.
Play buttons
Button | Action |
/ | Select a preset radio station. |
or |
|
Alphanumeric |
|
buttons |
|
Navigation Left/Right: Search for a radio
buttons station.
Up/Down: Fine tune a radio frequency.
Press to stop the installation of radio stations.
Press and hold to erase the preset radio station.
Button Action
RADIO Manual:
1)In radio mode, press RADIO.
2)When a radio frequency blinks, press OK to store the radio station.
3)Repeat step 1 and 2 to store other stations.
Automatic:
In radio mode, press and hold RADIO for three seconds to reinstall all the available radio station.
Tuning grid
In some countries, you can toggle the FM tuning grid between 50 kHz and 100 kHz.
1
2 Press 
.
3
MP3 player
Connect a MP3 player to play audio files.
What you need
•An MP3 player.
•A 3.5mm stereo audio cable.
1 Using the 3.5mm stereo audio cable, connect the MP3 player to the AUDIO IN connector on your home theater.
• If you use 6.5mm stereo audio cable, connect the MP3 player to your home theater using a 3.5mm - 6.5mm converter jack.
2 Press AUDIO SOURCE repeatedly until AUDIO IN appears on the display panel.
3 Press the buttons on the MP3 player to select and play audio files.
EN 15
