Philips HTL3110B Play audio through Bluetooth, Surround sound mode, Equalizer, Night mode

Press NIGHT to turn night mode on or off.

Press AUDIO SYNC +/- to synchronize the audio with the video.

Press TREBLE +/- or BASS +/- to change the frequency.

•BRIGHT: Spice up your dull movies and music with added sound effects.

•CLEAR: Hear every detail in your music and clear voices in your movies.

•WARM: Experience spoken words and music vocals in comfort.

•PERSONAL: Personalize the sound based on your preferences.

Surround sound mode

Experience an immersive audio experience with surround sound modes.

1 Press SURROUND ON/OFF to turn

surround mode on or off.

• On: Create a surround listening experience.

• Off:Two-channel stereo sound. Ideal for listening to music.

Equalizer

Change the high frequency (treble) and low frequency (bass) settings of the SoundBar.

1

Synchronize video and sound

If the audio and video are not synchronized, delay the audio to match the video.

1

Night mode

For quiet listening, night mode decreases the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks.

1

Play audio through Bluetooth

Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers.

What you need

•	A Bluetooth device which supports
	Bluetooth profile A2DP, AVRCP and with
	Bluetooth version as 3.0 + EDR.
•	The maximum operational range between
	the SoundBar and a Bluetooth device is
1	approximately 10 meters (30 feet).
	Press on the remote control to switch
	the SoundBar to Bluetooth mode.
	»»BT is displayed on the display panel,
2	blinking.
	On the Bluetooth device, switch on
	Bluetooth, search for and select PHILIPS
	HTL3110B to start connection (see the
	user manual of the Bluetooth device on
	how to enable Bluetooth).
	»»During connection, BT on the display
3	panel blinks.
	Wait until you hear a beep sound from the
	SoundBar.
	»»When the Bluetooth connection
	succeeds, BT is displayed on the display
	panel.
	»»If the connection fails, BT on the
4	display panel blinks continuously.
	Select and play audio files or music on
	your Bluetooth device.
	• During play, if a call is coming, music
	play is paused. Play resumes when the
	call ends.
	• If your Bluetooth device supports
	AVRCP profile, on the remote control
	you can press		/ to skip to a track,
	or press	to pause/resume play.

10EN