Philips HTL3110B user manual Update software, Set display brightness, Apply factory settings

In any source mode, within three seconds press - (Volume), BASS - and TREBLE -. »»When the factory settings restore is complete, the product automatically

switches off and restarts.

Set display brightness

You can press DIM repeatedly to select a different brightness level of the display panel on this product.

Apply factory settings

You can reset this product to the default settings programmed at the factory.

1

5 Update software

To get the best features and support, update your product with the latest software.

What you need

•Connect this product to your TV through HDMI.

Check software version

In HDMI ARC source mode, press TREBLE -, BASS - and - (Volume) on the remote control.

Update software via USB

1 Check the latest software version on www.philips.com/support.

• Search for your model and click on "Software and drivers".

2 Download the software into a USB storage device.

A Unzip the download if zipped, and make sure that the unzipped file is named "HTL3110.BIN".

B Put the "HTL3110.BIN" file in the root directory.

3 Connect the USB storage device to the

(USB) connector on this product.

4 Switch this product to the HDMI ARC source, and switch your TV to the HDMI source.

5 On the remote control, within 6 seconds presstwice, and + (Volume) once, then hold down SURROUND ON.

»»If an upgrade media is detected, on the TV screen you are prompted to start the update.

12EN