Option 1: Connect audio through a digital optical cable
Best quality audio
TV |
1 Using an optical cable, connect the OPTICAL IN connector on your SoundBar to the OPTICAL OUT connector on the TV or other device.
•The digital optical connector might be labeled SPDIF or SPDIF OUT.
Option 2: Connect audio through analog audio cables
Basic quality audio
4Use your SoundBar
This section helps you use the SoundBar to play audio from connected devices.
Before you start
•Make the necessary connections described in the quick start guide and the user manual.
•Switch the SoundBar to the correct source for other devices.
Adjust the volume
1 Press +/- (Volume) to increase or decrease a volume level.
•To mute sound, press (Mute).
•To restore the sound, press (Mute) again or press +/- (Volume).
1 Using an analog cable, connect the AUX IN (3.5mm jack) on your SoundBar to the AUDIO OUT connectors (red and white) on the TV or other device.
2 Press repeatedly AUX on the remote control until AUX is displayed on the display panel.
Choose your sound
This section helps you choose the ideal sound for your video or music.
Sound mode
Select predefined sound modes to suit your video or music.
1 Press SOUND to select a sound option from the display panel.
•AUTO: Automatically select a sound setting based on the sound stream.
•POWERFUL: Enjoy thrilling arcade sounds, ideal for
•BALANCED: Experience the original sound of your movies and music, without added sound effects.
EN 9