•BRIGHT: Spice up your dull movies and music with added sound effects.
•CLEAR: Hear every detail in your music and clear voices in your movies.
•WARM: Experience spoken words and music vocals in comfort.
•PERSONAL: Personalize the sound based on your preferences.
Surround sound mode
Experience an immersive audio experience with surround sound modes.
1 Press SURROUND ON/OFF to turn
surround mode on or off.
• On: Create a surround listening experience.
•
Equalizer
Change the high frequency (treble) and low frequency (bass) settings of the SoundBar.
1
Synchronize video and sound
If the audio and video are not synchronized, delay the audio to match the video.
1
Auto volume
Turn the auto volume on to keep the volume constant when you switch to a different source.
1
Night mode
For quiet listening, night mode decreases the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks.
1
Note
•• If auto volume is set to turned on, you cannot enable the night mode.
Play audio through Bluetooth
Through Bluetooth, connect the SoundBar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundBar speakers.
What you need
•A Bluetooth device which supports
Bluetooth profile A2DP, AVRCP and with
Bluetooth version as 3.0 + EDR.
•The maximum operational range between the SoundBar and a Bluetooth device is approximately 10 meters (30 feet).
1 Press 
on the remote control to switch the SoundBar to Bluetooth mode.
»»BT is displayed on the display panel, blinking.
2 On the Bluetooth device, switch on Bluetooth, search for and select PHILIPS HTL6145 to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth).
»»During connection, BT on the display panel blinks.
3 Wait until the SoundBar beeps.
»»When the Bluetooth connection succeeds, BT is displayed on the display panel.
»»If the connection fails, BT on the display panel blinks continuously.
10EN
