Getting Started (continued)
English
Setting the speakers’ channels
You can adjust the delay times (centre and surround only) and volume level for individual speakers. These adjustments let you optimise the sound according to your surroundings and setup.
Before you start...
Stop the disc playback by pressing STOP button twice or remove the disc from the disc tray. Otherwise, the settings are not accessible.
A In disc mode, press SETUP on the remote control.
B Press | repeatedly to select { Audio | ||
Setup Page }. |
| ||
C Press | to highlight { Speakers |
| |
Volume } and press . |
| ||
Audio Setup Page |
| ||
Speakers Volume |
|
| |
Speakers Delay |
|
| |
CD Upsampling |
|
| |
Audio Sync | Speakers Level Setup |
| |
|
| Front Left | 0dB |
|
| Front Right | 0dB |
|
| Center | 0dB |
|
| Subwoofer | 0dB |
|
| Rear Left | 0dB |
|
| Rear Right | 0dB |
D Use keys to set the volume level for each speaker
E Use keys to highlight { Speakers Delay } and press .
Audio Setup Page |
|
Speakers Volume |
|
Speakers Delay |
|
CD Upsampling |
|
Audio Sync |
|
Speakers Distance Setup |
|
Center | 0ms |
Rear Left | 0ms |
Rear Right | 0ms |
F Use keys to set the delay times (0 ms ~ 15 ms) for centre and rear speakers that best suit your surround sound needs.
G Press OK to confi rm.
Helpful Hints:
–A 1ms increase/decrease of delay time is equivalent to 30 cm change in distance.
–Use the longer delay time settings when the rear speakers are closer to the listener than the front speakers.
–The test tone will be automatically generated to help you judge the sound level of each speaker.
22
