Apex Digital HT-175 manual Subwoofer/Speaker Setup

SUBWOOFER/SPEAKER SETUP

NOTE: Before making or changing any rear panel connections, make sure that all the compo- nents are switched off and unplugged from the power supply.

First Connect (see diagram below) the supplied “All in One Link” Cable to the HT-175 main unit and the Subwoofer, this cable transfers the pre-amp signals for all channels from the main unit to the powered subwoofer.

IMPORTANT: Do not connect any of the supplied speakers to any other amplifier. This may result in malfunction or fire. This system has been designed for best performance when connected to the supplied speakers. We do not, therefore, recommend that you connect and use other speakers with this system, doing so will void your warranty. The front and center speakers supplied with this sys- tem are magnetically shielded. However, placing them extremely close to a television may result in color distortion on the screen. If this happens, move the speakers a little further away and switch off the television for a couple of minutes. The rear speakers and subwoofer are not magnetically shield- ed, so they should not be placed near a TV or monitor.

10