19
English

Finding the correct viewing

channel

A Press SOURCE button on the main unit
until ‘DISC’ appears on the display panel
(or DISC/USB on the remote control.)
B Turn on the TV and switch it to the
correct video-in channel.
è You may go to the lowest channel on
your TV, then press the Channel Down
button on your TV’s remote control until
you see the Video In channel.
è You may press ° button repeatedly
on your TV’s remote control.
è Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO, etc..
è If you are using a RF modulator, set
the TV to channel 3 or 4.
è
Refer to your TV’s user manual on
how to select the correct input on your
TV.

Getting Started

Switching to different play

source

l
Press the SOURCE button on the front
panel repeatedly to select :
DISC Õ FM Õ DOCK Õ TV
Õ AUX Õ MP3 LINE-IN
Õ DISC ....
Or
l
Press DISC/USB, RADIO, DOCK,
TV, AUX/DI or MP3 LINE-IN on the
remote control.
è Press DISC/USB to toggle between
DISC and USB mode (if USB is detected.)
è Press RADIO to switch to FM band.
è Press DOCK for connecting to the
iPod/GoGear player that is attached to
the docking station.
è If the audio input on this unit is
connected to your TV, press TV to hear
the TVs sound output through this unit.
è Press AUX/DI to switch to the
additional audio device that is connected
to the AUDIO IN-AUX jack on this unit.
è Press MP3 LINE-IN to switch to the
portable audio player that is connected
to the MP3 LINE-IN jack on this unit.