Philips HTS3151D user manual Speakers Volume, Speakers Delay, CD Upsampling

English

Setup Menu Options (continued)

Audio Setup Page (underlined options are the factory default settings)

Speakers Volume	Access the speaker’s level setup menu. Use τ υ keys to adjust
	the volume level for each connected speaker between -6dB to
	+6dB. See ‘Getting Started - Setting the speakers’ channels’
	for details.
	Access the speaker’s distance setup menu. Use τ υ keys to set
Speakers Delay
	the delay times for the center and rear speakers based on the
	listening position and distance. See ‘Getting Started - Setting
	the speakers’ channels’ for details.
	Note: 1 ms increase/decrease of delay time is equivalent to one (1) foot
	change in distance. Use the longer delay time settings when the rear
	speakers are closer to the listener than the front speakers.
	This feature enables you to convert the music CD to a
CD Upsampling
	higher sampling rate using sophisticated digital signal
	processing for better sound quality.
	{ Off }	– Turn off CD-upsampling.
	{ 88.2 kHz (X2) } – To convert the sampling rate of the CDs
		twice as high as the original rate.
	Notes:
	– If you have activated the CD upsampling feature, the audio output
	automatically switches to stereo mode.
	– If you press the SURROUND button on the remote control to select
	multi-channel mode, it turns off the CD upsampling feature.
	This feature allows you to adjust the audio delay times if the
Audio Sync
	video playback is slower than the audio output streams.

Use τ υ keys to set the delay times for the audio output between 0~200ms.

38