Philips HTS3300K user manual Tuner Operations, Tuning to radio stations, Presetting radio stations

Tuner Operations

E n g l i s h

IMPORTANT!

Make sure the FM and MW antennas are connected.

Tuning to radio stations

1 Press TUNER on the remote (or press SOURCE control at the front panel) to select “FM” or “MW”.

2 Press 3 / 4 briefly on the remote.

➜The display panel will show "SEARCH" until a radio station with sufficient signal strength is found.

3 Repeat step 2 if necessary until you find the desired radio station.

4 To tune to a weak station, press 1 / 2 briefly and repeatedly until an optimal reception is found.

Presetting radio stations

You can store up to 40 FM and 20 MW preset radio stations in the memory.

Helpful Hints:

–The system will exit presetting mode if no button is pressed within 20 seconds.

–If no valid frequency is detected during Plug and Play," PLEASE CHECK FM/MW ANTENNA" appears.

Using the Plug and Play

Plug and Play allows you to store all available radio stations automatically.

DVD system’s

display panel

1 AUTO INSTALL..

2 START..

1For first time setup, press TUNER.

➜ "AUTO INSTALL PRESS PLAY" appears.

2 Press PLAY B until "START ..." appears on the display panel.

➜The system will start searching from FM band and followed by MW band.

All the available radio stations with strong signal strength will be stored automatically.

➜Once complete, the last tuned radio station will play.

38