English
Setup Menu Options (continued)
Video Setup Page (underlined options are the factory default settings)
HDMI Setup | It provides the picture settings to enhance the appearance and |
| picture quality for disc playback. This feature is only applicable if |
| you have connected this unit to a |
| { Wide Screen Format } – Select a suitable screen display. |
| Note: This feature is only available if you have selected the { 16:9 |
| Wide Screen } in { TV Display } setup option. |
| { Superwide } |
| Display the 4:3 picture disc on the |
| with |
| screen is stretched less than the side). |
| { 4:3 Pillar Box } |
| Display the 4:3 picture disc on the |
| without stretching. Black bars will be shown on |
| the both sides of the TV screen. |
| { Off } |
| No aspect ratio adjustment is made when this |
| option is selected. |
| Note: The { Superwide } is only applicable for |
| resolution: 720p or1080i. |
| { HDMI Video }– Select a suitable video resolution depending |
| on the capability of the connected TV/device |
| to further enhance the HDMI video output. |
| { 480p } |
| Progressive output in 480 lines for NTSC TV. |
| { 576p } |
| Progressive output in 576 lines for PAL TV. |
| { 720p } - (if a HDMI TV is connected) |
| Progressive output upscale to 720 lines. |
| { 1080i } - (if a HDMI TV is connected) |
| Interlaced output upscale to 1080 lines. |
| { Auto } |
| The video output automatically follows the |
| display’s supported resolution. |
| Note: If no display appears on the TV due to |
| unsupported resolution, use the composite video |
| cable to connect this unit and your TV. Turn on |
| your TV to the correct input channel for the |
| composite video and adjust the resolution setting |
| to 480p/576p. |
40