AM/MW antenna
Basic Connections (continued)
English
fix the claw into the slot
FM
antenna
2
1
Step 4: Connecting the FM and AM/MW antennas
A Connect the supplied AM/MW loop antenna to the AM/MW jack. Place the AM/MW loop antenna on a shelf, or attach it to a stand or wall.
B Connect the supplied FM antenna to the FM 75 Ω jack. Extend the FM antenna and fix its ends to the wall.
For better FM stereo reception, connect an external FM antenna (not supplied).
Step 5: Connecting the power cord
Notes:
–For power supply rating, refer to the rear or bottom of the main unit.
–Turning off to standby mode does not disconnect the unit from mains.
A When completing all the connections, set the voltage selector to the local power line voltage.
Helpful Hints:
–Adjust the position of the antennas for optimal reception.
–Position the antennas as far away as possible from your TV, VCR or other radiation source to prevent any unwanted interference.
B Connect the AC power cord to the power outlet.
The standby LED on the main unit lights up.
Helpful Hint:
–Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.
17