Operating Instructions
Making Calls
•Pick up the Handset and press PHONE.
•When you hear a dial tone, dial the number.
•The IN USE LED will illuminate while the Handset is on a call. If you make a mistake when dialing, press OFF to hang up, then press PHONE to get the dial tone again.
•You must always press PHONE before you can dial a call on the Handset.
Answering Calls
•When an incoming call is ringing, the IN USE/CHARGING LED on the Base and IN USE/LOW BATT LED on the Handset will flash.
•To answer a call when the Handset is in the Base, just pick up the Handset.
— OR —
•To answer a call when the Handset is away from the Base, press any key on the Handset (except OFF). This is very useful in a dark environment; you do not have to fumble around looking for the PHONE key to answer the call.
Disconnecting
•To end a call, either place the Handset back in the Base.
— OR —
•Press OFF on the Handset.
Basic Operation
7
