Advanced Operation
Answering System Setup
PLAYBACK OF GREETINGS, MESSAGES AND MEMOS
From the Base Unit
Use the PLAY/STOP to start and stop playback of messages and memos.
•Press the SKIP key to jump ahead to the next message.
• Hold the SKIP key to speed up message playback.
•Press the REPEAT key to return to the beginning of the current message. 2 consecutive presses of the REPEAT key will take you back to the previous message.
•Hold the REPEAT key to slow down message playback.
•Press DELETE while a message is playing to erase that message.
• Press and Hold DELETE while the Answering System is idle to erase all previously heard messages.
•Adjust the Base Unit speaker volume using the VOL UP and DOWN keys.
The MESSAGE LED blinks when there are new messages. It glows steadily when it contains only old, previously heard messages.
From the Handset
•Press ANS.MACHINE on the Handset.
•Press 2 (PLAY) to hear messages from the Handset.
•Press 1 to repeat the message; press 3 to skip to the next message.
•Press # (DELETE) to erase the current message.
•Press OFF or ANS. MACHINE to end message playback and exit Answering
System mode; or | press | 2 (STOP) to end message playback and stay in |
Answering System | mode. |
|
NOTE: Your VT 2458 prevents accidental erasure of unplayed messages
To Hear Your Outgoing Greeting
•Press ANS.MACHINE on the Handset.
•Press 4 (MENU).
•Press 2 (PLAY/STOP).
•Press 4 (MENU) to continue programming, or OFF to exit.
16