VTech 2458 Storing Pauses in Memory, Press REDIAL/PAUSE Dial Press PROG/MEM Using Redial

Basic Operation

Operating Instructions

Storing Pauses in Memory

•To insert a pause in a phone number, pressPAUSE.The pauseis approximately 4 seconds in length. For longer pauses, press PAUSE two or more times. Each additional press adds an additional 4 second pause.

•If your phone is connected to a PBX you can store the PBX access number and a pause before the phone number. For example, to store 9-PAUSE-555- 1234 in memory location 8 do the following:

•Press PROG.

•Press 8.

•Press 9.

•Press REDIAL/PAUSE.

•Dial 555-1234.

•Press PROG/MEM.

Using Redial

•To redial the last number you called, press PHONE/FLASH then press REDIAL/PAUSE. The phone will automatically dial the number.

Storing a Redial Number into Speed Dial

•To store the last number you dialed as a Speed Dial number, press PROG/ MEM, a location number (0-9),REDIAL/ PAUSE, PROG/MEM.

The Page Feature

•From the Base Unit, press PAGE to signal the person at the idle Handset.

•To end the page at the Base, press PAGE again.

•To end the page at the Handset, press OFF.

•If the Handset is in use (off-hook) when PAGE is pressed on the Base Unit, the Handset will emit one page alert. If the Handset is not in use (on-hook), the page alert will continue for approximately 60 seconds.

•The page alert will continue for approximately 60 seconds.

10