Getting Started
Base Unit Features
1
9
8
7 
6
2
3 4 
5
1. MESSAGE LED
*Flashes slowly to indicate new messages; Glows steadily to indicate old (previously heard) messages; Flashes rapidly to indicate that the Answering System Message is FULL.
2. REPEAT
*During message playback, press REPEAT to return to the beginning of the messages being played. Hold down the REPEAT key to slow down message playback.
3. PLAY/STOP
*Press to play messages; press again to stop.
4. DELETE
*During message playback, press DELETE to erase the message being played. During idle mode, press DELETE to erase all previously played messages.
5. SKIP
*During message playback, press SKIP to the next message. Hold down the SKIP key to speed up message playback.
6. ANSWER ON/OFF LED
*Glows steadily when the Answering System is ON and the day and time has been set; Flashes to indicate that the day and time need to be set.
7. PAGE
*Press PAGE to engage the Handset in a ring sequence, which will last for 60 seconds. You can end the page by pressing PAGE again on the Base Unit, or pressing OFF on the Handset.
8. VOLUME
*Raise or lower the Base Unit speaker volume. These are 8 volume levels. At the lowest level(Level 1), incoming messages cannot be screened at the Base Unit as they come in.
9. IN USE/CHARGING LED
*Flashes slowly when the Handset is in TALK mode; Flashes in cadence with the inbound ringing; Glows when the Handset is charging in the Base Unit cradle; Flashes when Handset is in ANSWERING SYSTEM mode.
6
