VTech 2458 Checking the Ringer, Memory Dialing, Programming Speed Dial Numbers

Operating Instructions

Checking the Ringer

To check the ringer which is currently programmed, do the following:

• Press PROG/MEM.

• Press the # key.

• Press 0.

• Press the PROG/MEM key to confirm.

Memory Dialing

•The VT2458 can store up to 10 different phone numbers that you can dial just by pressing PHONE, PROG/ MEM and one of the number keys (0-9)

Programming Speed Dial Numbers

The Handset must be OFF.

•Press PROG/MEM. The IN USE LED will blink to indicate that you are in the programming mode.

•Press the number of the memory

location you wish to store the number in (0-9).

• Using the dial pad, dial the number you want to store. The number can be up to 16 digits long. The number can be entered manually or by using

REDIAL/PAUSE.

• Press MEM to store the phone number to the key you selected.The phone exits PROG/MEM mode and emits a tone.

Speed Number Dialing

•Press PHONE/FLASH to get a dial tone.

• Press PROG/MEM and the memory location number key (0-9).

• For example, to dial the number you assigned to key ‘8’, you would press PHONE, PROG/MEM, 8.

To Change or Replace a Speed Dial

Number

• To change or replace a stored number in speed dial memory, simply enter the new number and store it in the memory location you wish to change.

Basic Operation

9