Handset Features
1
2 
5
6
3 
7
4 
8
Getting Started
1. IN USE/LOW BATTERY LED
*Glows when the Handset is in use.
*Flashes duing programming mode.
*Flashes in cadence with incoming ringing.
*Flashes slowly when the battery pack needs recharging.
2. PHONE/FLASH
*Press this key to answer a call or get a dial tone. While on a call, when you receive a Call Waiting alert, press PHONE/FLASH to switch between calls.
3. ANSWERING MACHINE
*Press this key to enter Answering System mode. It will flash while the Handset is controlling the Answering System. It will also flash to alert you to new messages.
See the section Handset Layout
For Answering System Operation for more details.
4.VOLUME UP
/VOLUME DOWN
* These keys will raise and lower the earpiece volume while either IN PHONE or ANSWERING SYSTEM
mode.
5.REDIAL/PAUSE
*With the Handset ON, pressing this key will dail the last number you called. In Programming mode, REDIAL/PAUSE will add a 4 second pause to a dialing sequence.
6. OFF
*Press this key to end a call.The OFF key is also used to exit all modes of operation.
7. PROG/MEM
*This key is used to enter Programming mode, as well as Memory Dial mode.
8. CHANNEL
*If you experience noise or interference while on a call, press CHAN to switch to a clear channel.
5
