Getting Started
English
Finding the correct viewing channel
A Press SOURCE button on the main unit until ‘DISC’ appears on the display panel (or DISC/USB on the remote control.)
B Turn on the TV and switch it to the correct
You may go to the lowest channel on your TV, then press the Channel Down button on your TVs remote control until you see the Video In channel.
You may press ° button repeatedly on your TV’s remote control.
Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO, etc..
If you are using a RF modulator, set the TV to channel 3 or 4.
Refer to your TVs user manual on how to select the correct input on your TV.
Switching to different play source
Press the SOURCE button on the front panel repeatedly to select :
DISC ¤ FM ¤ AM ¤ DOCK ¤ TV
¤AUX ¤ DI ¤ MP3
¤DISC ....
Or
Press DISC/USB, RADIO, DOCK, TV, AUX/DI or MP3
remote control.
Press DISC/USB to toggle between DISC and USB mode (if USB is detected.) Press RADIO to toggle between FM
and AM/MW band.
Press DOCK for connecting to the iPod/GoGear player that is attached to the docking station.
If the audio input on this unit is connected to your TV, press TV to hear the TVs sound output through this unit.
Press AUX/DI to switch to the additional audio device that is connected to the AUDIO
Press MP3
20
