Philips HTS5500C/55 Accessing to Audio Setup, Speaker Setup, Night Mode turning on/off, 88.2 kHz

DVD Setup Menu Options (continued)

Accessing to Audio Setup Page

1Press DISC and followed by SETUP on the remote.

2Press 1 2 to select ‘AUDIO SETUP PAGE.’

3Press OK to confirm.

SPEAKER SETUP

CD UPSAMPLING

NIGHT MODE

Speaker Setup

These menus contain speaker setup options that allow you to adjust the individual speakers volume and delay time. For details, see page 45.

Night Mode - turning on/off

When night mode is activated, the high volume outputs are softened and low volume outputs are brought upward to an audible level (for DVD only.) It is useful for watching action movies without disturbing others at night.

1In ‘AUDIO SETUP PAGE,’ press 34to highlight { NIGHT MODE, } then press 2.

{ON }

Select this to level out the volume.

{OFF }

Select this when you want to enjoy the surround sound with its full dynamic range.

2Press 34 to select a setting and press OK to confirm.

CD Upsampling

This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality.

If you have activated the CD upsampling, the system will automatically switch to stereo mode.

1In ‘AUDIO SETUP PAGE,’ press 34 to highlight { CD UPSAMPLING, } then press 2.

{OFF }

Select this to disable CD-upsampling.

{88.2 kHz (X2) }

Select this to convert the sampling rate of the CDs twice higher than the original.

2Press 34 to select a setting and press OK to confirm.

Helpful Hint:

– If you press SURR button on the remote control to select “Multi-Channel” mode, it will disable the CD upsampling feature.

E n g l i s h

TIPS: The underlined option is the factory default setting.

To return to the previous menu, press 1. To remove the menu, press SETUP.

35

001-051-hts5500-55-Eng3	35	05/04/05, 4:18 PM
		3139 246 14793