14 EN
Connect radio antenna
3
4
1
2
1 Stand the AM/MW loop antenna
(supplied) upright to x its claw into the
slot.
2 Connect the AM/MW loop antenna to the
AM/MW socket. Then place the AM/MW
loop antenna on a shelf, or attach it to a
stand or wall.
3 Connect the FM antenna (supplied) to the
FM75 socket on this unit (for some
models, this cable has been connected).
Extend the FM antenna and x its ends to
the wall.
4 Connect the power cord when all the
required connections are complete and
you are ready to enjoy this DVD Home
Theatre unit.
Note
Before connect to power outlet, ensure that the •
voltage selector (at the rear of this unit) is set to the
local power line voltage.
Connect audio cables/other
devices
This section describes how you can route the
sound from other devices to this DVD Home
Theatre unit in order to enjoy sound output or
audio play with multi-channel surround
capabilities.
Connect audio from TV
(also used for EasyLink control)
TV AUDIO IN
(AUX1)
LR
1 Connect an audio cable (not supplied)
from the TV AUDIO IN (AUX1) sockets
on this unit to the AUDIO OUT sockets
on your TV.
Note
To listen to the audio output from this connection, •
press AUDIO SOURCE repeatedly until ‘AUX1
INPUT’ is displayed on the display panel.
1_hts8141_98_eng 4_final_with dock.indd 14 7/30/2009 4:44:55 PM