Safety Precautions and Maintenance

Installation Locations

FAQs

Troubleshooting

Regulatory Information

Other Related Information

Safety and Troubleshooting Information

Safety precautions and maintenance

WARNING: Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.

Read and follow these instructions when connecting and using your computer monitor:

To protect your display from possible damage, do not put excessive pressure on the LCD panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD panel.

Unplug the monitor if you are not going to use it for an extensive period of time.

Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never use alcohol, solvents or ammonia-based liquids.

Consult a service technician if the monitor does not operate normally when you have followed the instructions in this manual.

The casing cover should be opened only by qualified service personnel.

Keep the monitor out of direct sunlight and away from stoves or any other heat source.

Remove any object that could fall into the vents or prevent proper cooling of the monitor’s electronics.

Do not block the ventilation holes on the cabinet.

Keep the monitor dry. To avoid electric shock, do not expose it to rain or excessive moisture.

When positioning the monitor, make sure the power plug and outlet are easily accessible.

If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation.

To avoid the risk of shock or permanent damage to the set, do not expose the monitor to rain or excessive moisture.

IMPORTANT: Always activate a screen saver program during your application. If a still image in high contrast remains on the screen for an extended period of time, it may leave an 'after-image' or 'ghost image' on front of the screen. This is a well- known phenomenon that is caused by the shortcomings inherent in LCD technology. In most cases, the afterimage will disappear gradually over a period of time after the power has been switched off. Be aware, that the afterimage symptom cannot be repaired and is not covered under warranty.

Warning for lifting monitor - Do not use the area underneath the logo cover to grip or lift the monitor. Placing weight on the logo cover can cause it to break away from the body and cause the monitor to fall. When lifting the monitor, place one hand under the monitor's frame.

Page 2
Image 2
Philips HWS8200Q user manual Safety and Troubleshooting Information, Safety precautions and maintenance

HWS8200Q specifications

The Philips HWS8200Q is a cutting-edge soundbar designed to enhance your home audio experience, delivering immersive sound quality whether you're watching movies, listening to music, or playing video games. This sleek and modern soundbar blends seamlessly into any home entertainment setup, offering a perfect balance of functionality and aesthetics.

One of the standout features of the HWS8200Q is its powerful Surround Sound capability. Equipped with Virtual Surround technology, this soundbar creates an expansive soundstage that makes you feel like you're in the middle of the action. Whether it’s the subtle rustle of leaves or the dynamic impacts of an action sequence, every detail is rendered with precision and clarity.

Additionally, the HWS8200Q incorporates Dolby Atmos technology, which takes your audio experience to the next level. By allowing sound to move freely in any direction, Dolby Atmos helps create a three-dimensional audio environment. This allows not just for horizontal sound, but also for a vertical experience, heightening the intensity and realism of what you’re watching.

Another key characteristic of the HWS8200Q is its Adaptive Sound feature. This technology intelligently adjusts sound profiles depending on the content being played, ensuring optimal audio performance whether you're watching a dialogue-heavy drama or an explosive action film. As a result, you’ll never miss a single word of dialogue or the depth of a musical score.

The soundbar also features multiple connectivity options including HDMI ARC, optical, and Bluetooth, making it simple to connect to various devices such as TVs, gaming consoles, or mobile devices. With Bluetooth support, streaming your favorite playlists or podcasts from your smartphone becomes effortless.

The design of the HWS8200Q is both stylish and practical, with a low-profile build that can fit under most televisions without obstructing the screen. It also comes with a user-friendly remote control that allows easy navigation through different sound settings and sources.

In conclusion, the Philips HWS8200Q is an impressive soundbar that combines advanced audio technologies with a sleek design, making it an excellent addition to any home theater system. With its immersive sound, intelligent features and versatile connectivity, it promises to elevate your audio experience to new heights.