Philips HX6733 manual Clean and White mode brushing instructions, Brushing modes

10English

Your Sonicare is safe to use on:

-- Braces (brush heads wear out sooner when used on braces)

-- Dental restorations (fillings, crowns, veneers)

Note:The toothbrush may be turned off at any time by pressing and holding the power on/off button for 2 seconds.

Clean and White mode brushing instructions

The Clean and White mode combines 2 minutes of Clean mode for a whole mouth clean, with an additional 30 seconds of White mode to focus on the visible front teeth.

1Brush the first 2 minutes as instructed in steps

1-6 above.

2After the 2 minutes of Clean mode, the

White mode begins with a change in brushing sound and motion.That is your signal to start brushing the upper front teeth for 15 seconds

3 At the next beep and pause, move to the bottom front teeth for the final 15 seconds of brushing.

Brushing modes

Sonicare automatically starts in the default Clean mode.To select a  different brushing mode:

1Press the on/off button to toggle between modes.

,, The green LED indicates the selected mode.

Note:You can only switch between modes when the toothbrush is turned on.