Philips HX6733 manual Cord wrap on deluxe charger select models

English 13

-- When you use the Clean and White mode, you hear and feel a change in the brush head sound and motion after 2 minutes of Clean mode.Then move the brush head to the visible top front teeth and brush them for 15 seconds. At the final beep and pause, move to the visible bottom teeth and brush them for 15 seconds.

Cord wrap on deluxe charger (select models)

If your model includes the deluxe charger cover and base, the travel charger is pre-installed inside the cover. If you want to shorten the power cord, you can store excess cord in the cord wrap feature built into the charger base.

1To separate the charger cover from the charger base, press the two gray snap bars on the charger base and pull the white charger cover upwards.

2Wrap excess power cord around the gray charger base as shown in the picture. Be sure to wrap the cord on the inside of the two snap levers.

3When you have stored the excess cord, guide the power cord through the small groove in the rear of the gray charger base.

4Reattach the charger cover by pressing it down over the charger base until it snaps into place.