Philips LX3000D Setting up the subwoofer, Activating progressive scan, System Setup DVD, 4 3 LB

Changing the volume level

You can change the speakers’ sound distribution to suit your surround sound needs.

●Press CENTER +/- to adjust the level of the centre speaker.

➜“CNT +XX DB” is displayed.

●Press REAR +/- to adjust the level of the rear surround speakers.

➜“RE +XX DB” is displayed.

Note:

– “XX” denotes the volume level between -15db to 10db.

Setting up the subwoofer

1Use the supplied subwoofer cable to connect the subwoofer’s audio input jack to the WOOFER LINE OUT of the DVD system.

2Connect the subwoofer’s AC power cable to the wall

socket and switch on the power.

➜ It will automatically switch on when receiving an audio signal input. If there is no audio signal input, it will switch off automatically.

3Select the phase polarity at the rear of the subwoofer at either 0o or 180o to determine better bass reproduction effect in certain listening environment.

4Press SUBW +/- to adjust the volume level of the

subwoofer (-15dB to 10dB).

➜ “SUB +XX DB” is displayed.

Activating progressive scan

mode (for model LX3500D only)

The progressive-scan display presents 60 complete frames per second, rather than the 30 frames per second of interlaced scanning (ordinary normal TV system). With nearly double the numbers of line, progressive scan offers higher picture resolution and eliminates bothersome motion artifacts those jagged edges on moving objects.

To enjoy the full quality potential offered by progressive scan feature, a progressive scan TV is required.

1Press STANDBY ON to switch the system off.

2Slip the P-SCANswitch (located at back panel) to “ON” position.

3Press STANDBY ON again to switch the system on.

Note:

– You need to switch the system off before changing the progressive scan mode.

System Setup (DVD)

The system setup is carried out via the TV, it enabling you to customise the DVD system to suit your particular requirement. If the preferred options selected are not available on a disc, then the disc’s own preference will be used.

IMPORTANT !

To access the System Setup menu, playback must be stopped.

General operation

1Press SYSTEM MENU.

➜ icon will be highlighted in the menu bar on the TV screen.

2Press 4 to activate the System Setup menu.

3Use 1 2 34 keys to toggle through the functions and select your preferred option.

4Press OK to confirm a highlighted selection.

5To exit the System Setup menu, press SYSTEM MENU or OK.

The following items are available :

Setting the picture

– TV Shape

Select the aspect ratio of the TV to be connected.

4:3 PS (default setting)

–If you have a conventional TV set and your DVD is not formatted for widescreen viewing, use this setting. A wide picture is displayed on the whole TV screen with a portion automatically cut off.

4:3 LB

–If you have a conventional TV set and your DVD is formatted for widescreen viewing, use this setting. Wide bands will be displayed on the upper and lower portions of the TV screen.

16:9

–If you have a widescreen TV set, use this setting (you must also set your widescreen TV to “full size”).

English

PREPARATIONS 15

pg 01-26/LX3xxx/21-Eng 15 4/16/02, 11:21 AM