Specifications
Monitor (M2922A)
Federal Law restricts this device to use by or on the order of a physician.1
Standards Compliance
The
•
•IEC 1157
•IEC
•
•CAN/CSA
Class II equipment, double insulated
Continuous operation
Parameter |
|
| Input |
| Resulting |
| Connector |
| Isolation | ||
|
|
| |||
|
|
|
|
|
|
US |
|
| BF |
| BF |
|
|
|
|
|
|
Toco |
|
| BF |
| BF |
|
|
|
| ||
Electromagnetic Compatibility |
| ||||
Complies with |
| ||||
Environmental |
|
|
|
| |
Operating Temp: |
| ||||
|
|
| (50oF to 110oF) | ||
Storage Temp: |
| ||||
|
|
| |||
Relative Humidity: | 20% to 90% non | ||||
|
|
| condensing |
| |
Altitude: |
| ||||
Dimensions |
|
|
|
| |
Height: |
| 15.24 cm (6.0 inches) | |||
Width: |
| 26.4 cm (10.4 inches) | |||
Depth: |
| 13.7 cm (5.4 inches) | |||
Weight: |
| 2.27 kg (5lb) |
| ||
Power - Battery |
|
|
|
| |
Type: |
| Lead acid, rechargeable. | |||
Operation: |
| minimum | |||
|
|
| charged at 10oC, longer | ||
|
|
| at higher temperature. | ||
Recharge during |
| Maximum 14 hours full | |||
monitoring: |
| recharge during monitor- | |||
|
|
| ing (typical 11 hours). | ||
Recharge without | Maximum 8 hours to |
monitoring: | full recharge when no |
| monitoring occurs (typical |
| 4.75 hours). |
Low power warning: Approximately 30 minutes | |
| at 25oC. |
Power - External Power Supply | |
| 0.15A |
| or |
| |
| 0.08A |
Display |
|
Backlight: | Cold cathode fluorescent |
Active area: | 3.78” x 2.83” |
| (320 x 240 dots) |
Resolution: | 85 dots per inch |
Contrast: | 10:1 |
Ultrasound |
|
Isata: | < 4mW |
BPM range: |
|
Paper scale: | USA paper: |
| International Paper: |
| BPM. |
Ultrasound |
|
processing range: | |
Accuracy: | ± 1% ± 1 BPM. |
Leakage current: | ≤ 10 ∝ A @ 264 VAC applied |
| to transducer. |
Isolation: | >4 kV RMS, Type BF |
| applied part. |
Toco |
|
Range: | |
Resolution: | 1 count |
Accuracy: | ± 1% ± 1 relative unit |
Leakage: | ≤ 10 ∝ A @ 264 VAC applied |
| to transducer |
Isolation: | >4 kV RMS, Type BF |
| applied part |
Transducers
Doppler Ultrasound FHR (M1356A)
Weight: | 185 g (6.5 oz) |
Cable length: | 2.5m (8ft 2in) |
Diameter: | 75mm (2.95in) |
Latex free |
|
External Toco (M1355A)
Transducer Weight: 180 g (6.3 oz)
Cable length: 2.5m (8ft 2in)
Diameter: 75mm (2.95in)
Latex free
Remote Event Marker (15249A)
1.USA only | Length: 2.8m (9ft 2in) |
4
