Appendix
How to mount your system onto wall
IMPORTANT!
–The wall mounting instructions are for use by the qualified wall mounting person only!
–Ask a qualified person to help you with the wall mounting, which includes drilling holes on the wall and mounting the set onto wall.
What’s in the supplied mounting kit
1 x template |
164 mm |
6 x screws and dowels
2 x speaker brackets
What else you’ll need
Ð Drilling tools (e.g. an electric drill)
Preparation
1Find a suitable location for mounting and complete necessary rear connections (see Preparations).
2Ask a qualified person to help you with the wall mounting, who should:
Ðto avoid unexpected damage, learn about the piping, wiring and other relevant information inside your wall;
Ðaccording to the drilling requirements, choose suitable drilling tools;
Ðtake other precautions necessary for the wall mounting work.
Mounting your main unit onto wall
1Align the template in the chosen location on a wall. Use a pencil to mark the drilling positions (as shown).
164 mm |
2Drill two 6mm diameter holes as marked.
3Secure the dowels and screws in the holes respectively, leaving the screws 5mm proud of the wall.
4To detach the stand from the main unit,
a.As shown, hold down PRESS4.
b.Move out the stand to detach.
1
5Hang the main unit on the fastening screws.
English
25
