English

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

“NO DISC” is displayed.

Radio reception is poor.

The system does not react when buttons are pressed.

Sound cannot be heard or is of poor quality.

The left and right sound outputs are reversed.

The remote control does not function properly.

The timer is not working.

The Clock/Timer setting is erased.

Solution

✔Insert a disc.

✔Check if the disc is inserted upside down.

✔Wait until the moisture condensation at the lens has cleared.

✔Replace or clean the disc, see ÒMaintenanceÓ.

✔Use a finalised CD-RW or a correct MP3-CD format disc.

✔If the signal is too weak, adjust the antenna or connect an external antenna for better reception.

✔Increase the distance between the Micro HiFi System and your TV or VCR.

✔Remove and reconnect the AC power plug and switch on the system again.

✔Adjust the volume.

✔Disconnect the headphones.

✔Check that the speakers are connected correctly.

✔Check if the stripped speaker wire is clamped.

✔Make sure the MP3-CD was recorded within 32~256 kbps bit rate with sampling frequencies at 48 kHz, 44.1 kHz or 32 kHz.

✔Check the speaker connections and location.

✔Select the source (CD or TUNER, for example) before pressing the function button (ÉÅ,í, ë).

✔Reduce the distance between the remote control and the system.

✔Insert the battery with its polarities (+/Ð signs) aligned as indicated.

✔Replace the battery.

✔Point the remote control directly toward IR sensor on the front of the system.

✔Set the clock correctly.

✔Press TIMER to switch on the timer.

✔Power has been interrupted or the power cord has been disconnected. Reset the clock/timer.

24

Page 23 Page 25
Page 24
Image 24
Philips M298 owner manual Troubleshooting, Problem, Solution, Replace the battery
Page 23 Page 25

M298 specifications

The Philips M298 is a sophisticated medical device designed for monitoring and assessing vital signs in patients. This monitor plays a crucial role in various healthcare settings, including hospitals, clinics, and emergency units, making it an essential tool for healthcare professionals.

One of the main features of the Philips M298 is its ability to display real-time data on multiple parameters, including heart rate, blood pressure, respiratory rate, and oxygen saturation levels. The monitor employs advanced algorithms to provide accurate and reliable readings, ensuring that medical staff can respond swiftly to changes in a patient’s condition.

Equipped with a high-resolution display, the M298 allows for easy navigation and interpretation of patient data. The user interface is designed with simplicity in mind, enabling healthcare providers to quickly access necessary information without unnecessary delays. Further enhancing its usability, the device supports customizable settings, allowing users to tailor the display according to specific clinical needs.

In terms of connectivity, the Philips M298 features seamless integration with hospital information systems and electronic medical records, enhancing the efficiency of healthcare delivery. This connectivity facilitates the sharing of patient data among different medical staff and departments, leading to a more coordinated approach to patient care.

The M298 also boasts advanced alarm management capabilities. It allows clinicians to set personalized alarm thresholds, ensuring that alerts are triggered for critical changes in vital signs. This feature is vital for preventing overlooked alarms and maintaining patient safety.

In addition to its core functionalities, the Philips M298 is designed with durability and portability in mind. Its compact, lightweight design makes it easy to transport between different wards or rooms, while the robust build ensures it can withstand the rigors of a busy healthcare environment.

The device is powered by advanced battery technology, allowing for extended periods of monitoring without a direct power source. This feature is particularly beneficial in emergency situations and during patient transfers, where continuous monitoring is essential.

Overall, the Philips M298 stands out as a versatile and reliable vital signs monitor. Its combination of advanced monitoring capabilities, user-friendly design, robust connectivity options, and emphasis on patient safety makes it a valuable asset in modern healthcare settings. With the ongoing evolution of medical technology, the M298 exemplifies Philips' commitment to enhancing patient care and supporting healthcare professionals in their vital work.
Top Page Image Contents