Philips MC-130 Tape Operation / Recording, Tape playback, General information on recording

Synchro start CD recording

1 Select CD source.

2 Insert a disc and if desired, program track numbers.

3 Press STOP•OPEN to open the tape door.

4 Insert a suitable tape into the deck and close the tape door.

5 Press RECORD to start recording. ➜ Playing of the CD program starts automatically from the beginning of the CD after 7 seconds. It is not necessary to start the CD player separately.

To select and record a particular passage within a track:

● Press and hold down on PREV ¡1 or NEXT 2™ (on the remote control à or á ).

● When you recognize the passage you want, release PREV ¡1 or NEXT 2™.

● To interrupt disc playback, press PLAY•PAUSE 2; (on the remote control 2;).

● Recording will begin from this exact point in the track when you press RECORD.

Tape Operation / Recording

Tape playback

1Select TAPE source.

➜ The display shows TAPE throughout tape operation.

2Press STOP•OPEN to open the tape door.

3Insert a recorded tape and close the tape door. ● Load the tape with the open side downward and

the full spool to the left.

4Press PLAY 2 to start playback.

5To interrupt playback, press PAUSE.To resume, press this key again.

6By pressing à or á on the system fast winding of tape is possible in both directions.

7To stop the tape, press STOP•OPEN.

●The keys are automatically released at the end of the tape, except if PAUSE has been activated.

Note:

– The sound source cannot be changed while playing or recording a tape.

General information on recording

●Recording is permissible insofar as copyright or other rights of third parties are not infringed.

●For recording, use only NORMAL (IEC type I) tapes on which the tabs have not yet been broken.This deck is not suited for recording on METAL (IEC IV) type tapes.

●The best recording level is set automatically. Altering the VOLUME, INCREDIBLE SURROUND, DBB or INTERACTIVE SOUND controls will not affect the recording in progress.

●At the very beginning and end of the tape, no recording will take place during the 7 seconds when the leader tape passes the recorder heads.

●To protect a tape from accidental erasure, have the tape in front of you and break out the left tab. Recording on this side is no longer possible. If, however, you wish to record over this side again, cover the tabs with a piece of adhesive tape.

E n g l i s h

17