CD Operation
English |
|
|
|
|
|
PROGRAM | TIMER | CLOCK | REPEAT | SHUFFLE | |
| ON |
|
| BAND |
|
| OFF |
|
|
|
|
| PROGRAM |
|
|
|
|
| SOURCE |
|
|
|
|
| SELECT |
|
|
|
|
PLAY•PAUSE | STOP |
|
|
| |
PREV | NEXT | iR |
|
|
|
IMPORTANT:
The lens of the CD player should never be touched.
X
Playing a disc
This CD player plays Audio Discs including CD- Recordables and
¶
1Select CD source.
2Press OPEN•CLOSE on the top
of the system to open the CD compartment.
➜OPEN is displayed when you
open the CD compartment.
3Insert a disc with the printed side facing up and press down on OPEN•CLOSE to close the CD door.
➜READ is displayed as the CD player scans the contents of a disc, and then the total number of tracks and playing time are shown.
4Press PLAY•PAUSE 2; (on the remote control 2;) to start playback.
➜Current track number and elapsed playing time of the track are displayed during disc playback.
5To interrupt playback press PLAY•PAUSE 2; (on the remote control 2;). Press PLAY•PAUSE 2; (on the remote control 2;) again to resume play.
➜ The display freezes and the elapsed playing time flashes when playback is interrupted.
6To stop disc playback, press STOP 9.
Note: CD play will also stop when;
– the CD door is opened.
– the disc has reached the end.
– you select another source: TAPE,TUNER or AUX.
– you select to standby.
– you press the tape deck PLAY 2 key.
Selecting a different track
●Press PREV ¡1 or NEXT 2™ (on the remote control ¡ or ™) once or repeatedly until the desired track number appears in the display.
●If you have selected a track number shortly after loading a disc or in the PAUSE position, you will need to press PLAY•PAUSE 2; (on the remote control 2;) to start playback.
Finding a passage within a track
1Press and hold down on PREV ¡1 or NEXT 2™ (on the remote control à or á ).
➜The disc is played at high speed and low volume.
2When you recognize the passage you want, release PREV ¡1 or NEXT 2™ (on the remote control à or á ).
➜Normal playback continues.
Note:
–During a disc program or if SHUFFLE/ REPEAT active, searching is only possible within the same track.
14
