Tape Operation / Recording
E n g l i s h
6To stop recording, press STOP 9.
Recording from the radio
1Tune to the desired radio station (see Tuning to radio stations).
2Press OPEN to open the tape door.
3Insert a suitable tape into the deck and close the tape door.
4Press RECORD to start recording.
➜ RECORD is displayed briefly and RECORD is shown during recording.
●If you wish, press CLOCK once to monitor the counter display.
5To stop recording, press STOP 9.
Recording from Aux
1Select AUX source.
2If necessary, prepare the additional appliance for recording.
3Press RECORD to start recording.
➜ RECORD is displayed briefly and RECORD is shown during recording.
●If you wish, press CLOCK once to monitor the counter display.
4To stop recording, press STOP 9.
Recording timer
To record from the radio, you will need to use a preset radio station and to set a start (ON) and finish (OFF) time.
1Insert a suitable tape into the deck.
➜If desired, select tape reverse mode option.
2Select the preset radio station to record from.
3Press TIMER ON•OFF for more than 2 seconds.
➜TIMER flashes and a source is displayed.
4Press SELECT SOURCE repeatedly, or turn VOLUME clockwise until REC TUN source is displayed.
5Press TIMER ON•OFF to confirm the source.
➜SET ON TIME is displayed, TIMER and the clock digits for the hours flash.
6Turn VOLUME to set the hours: clockwise for hours up;
7Press TIMER ON•OFF again.
➜The clock digits for the minutes flash.
8Turn VOLUME to set the minutes: clockwise for minutes up;
9Press TIMER ON•OFF to confirm the ON start time.
➜SET OFF TIME is displayed, TIMER and the clock digits for the hours flash.
10Repeat steps
11Press TIMER ON•OFF to confirm the timer settings.
➜TIMER is shown and the recording timer is now set.
18